At Saras Udyog we make single-face velvet ribbon in bulk rolls in Jaipur, India: a soft polyester pile on a woven base with a smoother satin reverse, in six standard widths from 6 mm to 50 mm, dyed in our own dye house. Burgundy, wine, emerald, navy, anthracite and black are standard shades, and we dye outside that card to your reference. MOQ is 2,000 metres — about 2,187 yards — per SKU, and every width-and-shade combination counts as its own SKU.
Indicative price₹ 8–25 / m(approx. US$0.08–0.26 / m)Free delivery in India · GST 5% extra MOQ: 2,000 m Outside India: shipping is charged at checkout by destination zone and maximum packed weight and refunded down to the courier's actual charge after weighing; pay by international card or bank transfer. Get the price list on WhatsAppBrowse the catalogue
We have been making ribbon and cord at our own factory in Jaipur since 1991. Twisting, braiding, dyeing and tipping all sit under our own roof, velvet included — we do not send it out to be dyed. Rolls ship to buyers in more than 60 countries.
What we make is the single-face version: a polyester pile on a woven base, with firm edges that do not fray where the ribbon is cut.
Which Widths and Shades We Make
We run six standard widths, from thin 6 mm velvet ribbon to wide 50 mm (about 2 inch) ribbon, all of them single-face velvet — pile on the front, a smoother satin reverse behind it.
Width
Typical use
6 mm
Invitations, labels, small packets, jewellery and chokers
10 mm
Gift wrap, hair clips, box ties
15 mm
Bows, hair bows, headbands, card decoration
25 mm
Box ribbon, home textiles, garment trim
38 mm
Large bows, Christmas bows, window display
50 mm
Table decoration, wreaths, wine and perfumery packaging
Velvet ribbon for Christmas bows and wreaths sits at the 38 mm and 50 mm end of this range.
Burgundy, wine, emerald, navy, anthracite and black are the shades we run as standard, so a burgundy, emerald green, navy or black velvet ribbon comes off the standard card. Because the dye house is ours, we also dye to a tone outside that card, matched from your physical swatch or colour reference. The minimum is the same either way: 2,000 metres per SKU.
What to Check When You Judge Velvet
Three things tell you what a velvet ribbon is worth, and all three can be checked on a cut length in the hand.
Pile density — hold the ribbon up to the light. On cheap velvet the pile is sparse and the woven ground shows through it.
Crush recovery — press the pile with a finger. Good pile lifts back within a few seconds; pile that stays flattened leaves a bow looking crushed from the first day.
Colour fastness — we do the dyeing ourselves, so every batch is tested separately. A ribbon that gives up colour onto pale gift paper comes back as a return.
The edge is a smaller tell but a real one: an edge that is not cut cleanly is a machine problem rather than a scissors problem. Ours are finished firm so they do not fray at the cut.
How Ordering Works
Send the widths, the shades and the metreage. A quote comes back within one working day.
Minimum — 2,000 metres, about 2,187 yards, per SKU. Every colour-and-width combination is its own SKU, so ten combinations comes to 10,000 metres. Several widths and shades can travel in one shipment; each is quoted at the minimum.
Custom shades — matched in our own dye house from a physical swatch or a colour reference, at the same minimum per SKU.
Samples — an optional 10 m sample of each width and shade you intend to buy (₹3,500 + 5% GST, not adjusted against the bulk order) can be sent before the production run is closed.
Rolls — roll length is made to order; width, shade and metreage are all set with the order.
Production — made-to-order designs are dispatched in 20 to 25 days after the order is confirmed. Transit then runs 7-14 days by air or 25-40 days by sea, or about 2 to 6 days by courier within India.
The inch equivalents of the six velvet widths are in the ribbon width chart.
Dispatch and freight
Delivery anywhere in India is included in the price. Made-to-order designs are dispatched in 20 to 25 days after the order is confirmed, then about 2 to 6 days by courier. We ship worldwide. Orders placed on macramethread.com are shipped to 90 countries with the shipping charge shown at checkout, priced by destination zone and maximum packed weight and refunded down to the courier's actual charge after weighing; export consignments larger than the online checkout allows are quoted ex-works Jaipur with air and sea options. Buyers outside India pay at checkout by international card through Razorpay, or by bank transfer against a proforma invoice; PayPal remains available for orders placed by email or WhatsApp.
Velvet Ribbon, 6-50mm — Specifications
Type
Single-face velvet ribbon — pile on the front, smoother satin reverse
Material
Polyester pile on a woven base
Widths
6 mm to 50 mm
Sizes
Six standard widths: 6, 10, 15, 25, 38 and 50 mm
Colours
Burgundy, wine, emerald, navy, anthracite and black as standard; custom dyeing to your physical swatch or colour reference
Rolls
Roll length made to order — tell us the metreage that suits your line
MOQ
2,000 metres (about 2,187 yards) per SKU — each width-and-shade combination is a separate SKU
Customisation
Width, shade and roll length made to order
Packing
Rolls on cardboard cores, in moisture-barrier reinforced export cartons
Lead time
Quote within one working day; dispatch 20 to 25 days after the order is confirmed; then air 7-14 days, sea 25-40 days
Origin
Jaipur, India — own factory since 1991, velvet dyed in our own dye house
Frequently asked questions
What is the minimum order for wholesale velvet ribbon?
2,000 metres — about 2,187 yards — per SKU. Every colour-and-width combination counts as a separate SKU, so ten combinations comes to 10,000 metres in total. The same minimum applies to a custom-dyed shade. Several widths and shades can travel in one shipment, with each quoted at the minimum.
How much does velvet ribbon cost?
₹8-25 per metre delivered anywhere in India — velvet sits above flat ribbon because the pile is a second manufacturing step. The 6 mm width is at the bottom of the band, 50 mm at the top, and custom-dyed shades price above the six standard ones.
What widths of velvet ribbon do you make?
Six standard widths: 6, 10, 15, 25, 38 and 50 mm. The narrow end goes to invitations, labels, small packets, jewellery and chokers; the middle to gift wrap, hair bows, headbands, card decoration, box ribbon, home textiles and garment trim; the wide end to large and Christmas bows, window display, table decoration, wreaths, and wine and perfumery packaging.
Can you make custom velvet ribbon colours?
Yes. Burgundy, wine, emerald, navy, anthracite and black are run as standard shades, and beyond those we dye to your tone in our own dye house in Jaipur, matched from a physical swatch or a colour reference. Custom dyeing carries the same 2,000 metres per SKU.
How do I judge velvet ribbon quality before ordering?
Check three things on a cut length. Pile density: hold it to the light, and on thin velvet the woven ground shows through the pile. Crush recovery: press the pile with a finger — good pile lifts back within a few seconds, and pile that stays flat will leave a bow looking crushed from day one. Colour fastness: a ribbon that gives up colour onto pale gift paper means returns, which is why we test each batch separately. The cut edge is a smaller tell: it should be clean and should not fray.
How is velvet ribbon packed and shipped?
Rolls are wound on cardboard cores and packed into reinforced export cartons with a moisture barrier, which matters for a pile good. Made-to-order designs are dispatched in 20 to 25 days after the order is confirmed, then air freight takes 7-14 days from Jaipur and sea freight 25-40 days.
